Fix it Friday! 😂 Had a caliper seize up on me on the way to go wheeling at Rausch Creek. I’m glad I had the replacement. I had the feeling it was going to be trouble.
Poppin’ wheelies for Front End Friday!
Poppin’ wheelies for Front End Friday! The trail guide said to give it a little “Moab Bump”. My guess is, this is NOT what he intended. 😂😂
When I made the corner armor, I wanted to relocate my license plate
When I made the corner armor, I wanted to relocate my license plate to the spare. I made a couple of these, one for me and one for a friend.
Throwback Thursday when the Mule was still just a foal!
Added these JCR Offroad inner fender liners when I installed the steel flares.
Added these JCR Offroad inner fender liners when I installed the steel flares. Of course I had to add the blue accent. 😊 These things are really nice and add a little extra ventilation.
No matter how accurate I tried to be
No matter how accurate I tried to be, both of the lower hopes I drilled for my Rockhard 4×4 trail cage A pillar supports would not line up. I can only assume that it went in at a slight angle making this bottom hole in the wrong spot. I could have wallowed out the hole. But I liked my solution better. I plug welded the old hole and drilled and tapped a new one in the “right” spot. 😊
Weld it up Wednesday!
Weld it up Wednesday! At least that’s what I’m going to call it. When I got by Rock Hard 4×4 Cage, I wanted to modify the overhead bar to be a little cleaner. I added weld along the seems where the plate met the tube and then ground it smooth. Since I left it uncovered, I think this is a better look for me. Hope I never have to test it!
Poison Spyder overlook on Cliffhanger.
Back before I got my welding certification…
Back before I got my welding certification, a friend of mine welded up the truss and brackets on the Rubicon axles I acquired. The Barnes truss was an easy fit up and has held up very well.
