Thanks, @supercleanteam, this will come in handy. Appreciate the support!
Super excited to find this Union Tool Chest Works tool box on Facebook. Unfortun
Super excited to find this Union Tool Chest Works tool box on Facebook. Unfortunately, it is missing the front cover and needs a lot of TLC. I hope to have a new front cover made, but finding a lock for it might be difficult to impossible. Once I clean it up, I’ll decide if it needs to be refinished completely or only some new wax. I did some research and am confident this was made between 1916 and 1918!
.
.
A little before and after of a Famco 13R 4 ton arbor press I recently bought at
A little before and after of a Famco 13R 4 ton arbor press I recently bought at auction for a song. Power washed it, stripped the paint, new rattle can paint job and a little paint pen for the lettering. If I subtract for how much I sold my Chinese import 2 ton press, I’m into this for about $40.
My first try at machining a splined shaft. This is a test piece in Delrin before
My first try at machining a splined shaft. This is a test piece in Delrin before committing to some of the limited amount of 1045. Going to be a fun project to complete. Hopefully a YouTube video on making this will drop Sunday. 🤞🏻
I feel like something is missing here. Check out my latest video on the Kearney
I feel like something is missing here. 😂 Check out my latest video on the Kearney & Trecker 2HL mill (link in bio). I got the feed distribution box out of the knee, with a few issues.
.
.
.
.
.
.
.
.
The table is off the K&T! It was actually a lot easier than I was expecting it t
The table is off the K&T! It was actually a lot easier than I was expecting it to be. The good news is the ways look pretty good. The bad news is the bearings need replaced and they are EXPENSIVE (at least to me)! See the link in my bio for the YouTube video on how I removed it.
.
.
.
.
.
.
.
.
I should be rewarded. With a lathe!
The eagle has landed!
Nothing sketchy going on here.
In this lesson, we learn how to break drill bits. Twice. And how hindsight is 20
In this lesson, we learn how to break drill bits. Twice. And how hindsight is 20/20 or better. I would seriously do everything different. LOL! Link in my bio for the YT video.
.
.
.
.
.
.
.
.