I’ve been working on repairs to this Kearny & Trecker Universal Milling Head for a long time. I am finally ready to get it back together. Check out the link in my bio to the YouTube video of part 1.
.
.
.
.
.
.
.
.
The table is off the K&T! It was actually a lot easier than I was expecting it t
The table is off the K&T! It was actually a lot easier than I was expecting it to be. The good news is the ways look pretty good. The bad news is the bearings need replaced and they are EXPENSIVE (at least to me)! See the link in my bio for the YouTube video on how I removed it.
.
.
.
.
.
.
.
.
I feel like something is missing here. Check out my latest video on the Kearney
I feel like something is missing here. 😂 Check out my latest video on the Kearney & Trecker 2HL mill (link in bio). I got the feed distribution box out of the knee, with a few issues.
.
.
.
.
.
.
.
.
Managed to get the saddle off the knee of the Kearney & Trecker 2HL. This is the
Managed to get the saddle off the knee of the Kearney & Trecker 2HL. This is the last major component to come off the mill. I was advised NOT to take the knee off, plus to do so would probably be impossible in my current shop. Video link in my bio.
.
.
.
.
.
.
.
.
In this lesson, we learn how to break drill bits. Twice. And how hindsight is 20
In this lesson, we learn how to break drill bits. Twice. And how hindsight is 20/20 or better. I would seriously do everything different. LOL! Link in my bio for the YT video.
.
.
.
.
.
.
.
.
I spent a bunch of time machining this cast iron straight edge from Denis Foster
I spent a bunch of time machining this cast iron straight edge from Denis Foster for an upcoming class on machine scraping. First time ever machining something like this, especially the odd shapes. I got a lot of help from the maker, and others, and it came out great! There’s a link in my bio to the first of the two part video series I have up on YouTube.
.
.
.
.
.
.
.
.
I removed the drive train from my K&T 2HL horizontal mill. My only purpose was t…
I removed the drive train from my K&T 2HL horizontal mill. My only purpose was to clean the insides of the column real good of all the gunk that’s collected in there over the last 80 years. That, and to inspect the gears for excessive wear or broken teeth.