I got the apron reassembled and back on the lathe, although a little out of order. I was waiting until the video was ready. It’s ready! ;)
.
.
.
.
.
.
.
Looking back at photos on how bad the apron was on the 13″ South Bend lathe.
Looking back at photos on how bad the apron was on the 13″ South Bend lathe. This thing has a lot of moving parts in it that needed to be cleaned. So glad that it’s coming together now. Almost there…
.
.
.
.
.
.
.
More progress being made on the restoration of my 13″ South Bend lathe.
More progress being made on the restoration of my 13″ South Bend lathe. I get the headstock back together and mounted on the bed. I do find out, however, that the forward spindle bearing is out of tolerance. I will need to address that soon.
.
.
.
.
.
.
.
Spent some time getting the pile of parts that make up the Quick Change Gearbox
Spent some time getting the pile of parts that make up the Quick Change Gearbox on my 1941 South Bend lathe put back together and installed on the machine. It went back together way easier than it did coming apart!
.
.
.
.
.
.
.
My 1941 South Bend lathe is starting to come back to life!
My 1941 South Bend lathe is starting to come back to life! I finally get the saddle, cross slide and compound reassembled and installed, but not without issues. The compound feed nut was not original and had been replaced with something that wasn’t working.
.
.
.
.
.
.
.
Work continues on the 1941 South Bend lathe.
Work continues on the 1941 South Bend lathe. I’ve cleaned up the motor housing, the chip pan and the bed and can start putting those pieces back together. The badge on the bed was painted over. I would liked to have restored it to the factory red and black colors, with just the letters staying brass, but it would have been very difficult. I decided for these, I was just going to leave it as is.
.
.
As if I didn’t have enough to do, I made a set of removable soft jaws..
As if I didn’t have enough to do, I made a set of removable soft jaws for a 4-jaw lathe chuck. I have an upcoming project idea that will require this chuck and I don’t want to damage the work piece. Took a short break from the restoration project to put these together.
I have the apron cleaned up, painted and ready to be assembled.
I have the apron cleaned up, painted and ready to be assembled at some point on my 80 year old lathe. Need to get through some other parts of this machine first.
.
.
.
.
.
.
.
Instead of going to Moab this year, I get to clean and strip the paint off of this!
Instead of going to Moab this year, I get to clean and strip the paint off of this motor housing. Yay, me!
.
.
.
.
.
.
.
Look! In the air! Is it a Bird? A Plane? No! It’s the lathe bed!
Look! In the air! Is it a Bird? A Plane? No! It’s the lathe bed! I finally got around to disassembling the major components of my 1941 South Bend lathe. Got the motor assembly out, the bed off the lefs, and the chip pan is clear. Getting closer by the day! Check the link in my bio for a video I made.
.
.
.
.
.
.
.