Poppin’ wheelies for Front End Friday! The trail guide said to give it a little “Moab Bump”. My guess is, this is NOT what he intended. 😂😂
When I made the corner armor, I wanted to relocate my license plate
When I made the corner armor, I wanted to relocate my license plate to the spare. I made a couple of these, one for me and one for a friend.
Throwback Thursday when the Mule was still just a foal!
Added these JCR Offroad inner fender liners when I installed the steel flares.
Added these JCR Offroad inner fender liners when I installed the steel flares. Of course I had to add the blue accent. 😊 These things are really nice and add a little extra ventilation.
No matter how accurate I tried to be
No matter how accurate I tried to be, both of the lower hopes I drilled for my Rockhard 4×4 trail cage A pillar supports would not line up. I can only assume that it went in at a slight angle making this bottom hole in the wrong spot. I could have wallowed out the hole. But I liked my solution better. I plug welded the old hole and drilled and tapped a new one in the “right” spot. 😊
Weld it up Wednesday!
Weld it up Wednesday! At least that’s what I’m going to call it. When I got by Rock Hard 4×4 Cage, I wanted to modify the overhead bar to be a little cleaner. I added weld along the seems where the plate met the tube and then ground it smooth. Since I left it uncovered, I think this is a better look for me. Hope I never have to test it!
Poison Spyder overlook on Cliffhanger.
Back before I got my welding certification…
Back before I got my welding certification, a friend of mine welded up the truss and brackets on the Rubicon axles I acquired. The Barnes truss was an easy fit up and has held up very well.
Making my way across the Devil’s Crack on Moab Rim.
So far, pretty happy with this Synergy tie rod and drag link.
So far, pretty happy with this Synergy tie rod and drag link. Beefy! I especially like that I can carry one spare rod end that will work on either end of either component.