I was sent a torch mounted amperage control to try out and review. I published a video on how I set it up and my first attempts at getting comfortable with it. Check the link in my bio for the video.
.
.
.
.
.
.
.
.
My neighbor asked me to build a hinged flag pole mount.
My neighbor asked me to build a hinged flag pole mount to replace the rusted one that was in his front year.
.
.
.
.
I tried giving the white vinegar soak another try.
I tried giving the white vinegar soak another try and see how effective it is for removing mill scale. Wow. It didn’t work this well last time I did. I’m a believer.
.
.
.
.
Welding god or God welder?
I used some @bluedemonweld Aluminum Bronze TIG rod to repair the worn splines on this shaft
I used some @bluedemonweld Aluminum Bronze TIG rod to repair the worn splines on this shaft from the power feed clutch on an 80 year old lathe. I have never done something like this before, and I think it went well and came out OK. Check the link my bio for a video.
•
•
•
•
•
I made a second version of a welding square.
I made a second version of a welding square. These were drawn up in Fusion 360, exported as DXF files, and then sent to a CNC water jet controller and cut from .250 steel.
•
•
•
•
•
Welding squares
Inspired by a product I have seen online and used in other YouTube videos, I set out to make my own welding square. I learned a little Fusion 360 and designed this small 8″ welding square. I was fortunate enough to have this cut out on a water jet at a local maker space. Used the Primeweld TIG 225x to weld it up.
Don’t tell the cops!
Don’t tell the cops! ;)
I was making some tack welds on a project the other day and it was awkward to reach some of the areas with the torch and reach the foot pedal at the same time. I installed the finger trigger on my TIG torch to make these operations easier. I made a video of the results and some explanation of what how some of the controls on the welding machine are affected.
•
•
•
•
•
I had designed this small cabinet a while ago.
I had designed this small cabinet a while ago. When I find time, I try and make progress on it. I have the main frame finished, not it’s time to add some doors.
I saved hundreds of dollars by using my Primeweld TIG 225
I saved hundreds of dollars by using my @primeweld TIG 225 to make these locking clamps for my @weldtables welding table.